Pacific Steel & Recycling | Steel : Products : Sheet

Secure Area

A NORTHWEST TRADITION BUILT ON TRUST

About Us

Locations

Steel

» Products
» Steel Handbook
[PDF]
» Processing Services

Recycling

Ag/Livestock Equipment

Ornamental Iron/ Trailer Parts

Visit Our Blog

Steel Sheets

[Back to Steel]

All weights are based on nominal sizes - Actual product sizes and weights may vary

HOT ROLLED SHEETS, ASTM A569

A low cost commercial quality sheet having a maximum carbon of0.15percent. This material is intended for applications where bending, moderate forming or drawing, and welding may be involved.

COLD ROLLED SHEETS, ASTM A366

A commercial quality sheet supplied in lighter gauges than available in Hot Rolled Sheets. (Lighter than 16 ga.) The additional mill processes result in a more controlled thickness, finish, and mechanical properties than Hot Rolled Sheets. The matted finish proves an excellent base for painting operations.

GALVANIZED SHEETS, ASTM A653

Commercial quality sheet is zinc coated in a continuous hot dipped process to produce a low cost corrosion resistant steel. The coating will not peel or flake in most forming oeprations.

“PAINTLOK”, ELECTROLYTIC ZINC-COATED STEEL SHEETS

Commercial quality sheets which have been electrolytically plated with zinc and other phosphate coated for better paint adherence. The coating will not peel or flake in most forming operations.

Hot Rolled Sheets
Gauge	lbs. per sq. ft.	Width & Length Inches	Est. Wt. per Sheet, lbs.
16 ga. - (.0598”)	2.5	48x96	80.00
		48x120	100.00
!	!	48x144	120.00
!	!	60x120	125.00
!	!	60x144	150.00
14 ga. - (.0747”)	3.125	48x96	100.00
		48x120	125.00
!	!	48x144	150.00
!	!	60x120	156.25
!	!	60x144	187.50
!	!	60x240	312.50
12 ga. (.1046”)	4.375	48x96	140.00
		48x120	175.00
!	!	48x144	210.00
!	!	48x240	350.00
!	!	60x120	218.75
!	!	60x144	262.50
!	!	60x240	437.50
!	!	72x120	262.50
!	!	72x144	315.00
!	!	72x240	525.00
11 ga. (.1196”)	5.0	48x96	160.00
		48x120	200.00
!	!	48x240	400.00
!	!	60x120	250.00
!	!	60x144	300.00
!	!	60x240	500.00
!	!	72x120	300.00
!	!	72x240	600.00
10 ga. - (.1345”)	5.625	48x96	180.00
		48x120	225.00
!	!	48x144	270.00
!	!	60x120	281.25
!	!	60x144	337.50
!	!	60x240	562.50
!	!	72x120	337.50
!	!	72x144	405.00
!	!	72x240	675.00
7ga. - (.1793”)	7.5	48x96	240.00
		48x120	300.00
!	!	48x144	360.00
!	!	48x240	600.00
!	!	60x120	375.00
!	!	60x144	450.00
!	!	60x240	750.00
!	!	72x120	450.00
!	!	72x144	540.00
!	!	72x240	900.00
[TOP]

COLD ROLLED SHEETS
Gauge	lbs./sq. ft.	Width & length	Est. Wgt. per sheet
24 ga. (.0239”)	1.00	48x120	40
22 ga. (.0299”)	1.25	48x120	50
20 ga. (.0359”)	1.50	48x120	60
18 ga. (.0478”)	2.00	48x120	80

GALVANIZED SHEETS
Gauge	Est. Lbs per Sq. Ft.	Width & Length	Lbs./Sheet
30 ga.	.656	36x96	15.74
		36x120	19.69
28 ga.	.781	36x96	18.74
		36x120	23.43
!	!	48x96	24.99
26 ga.	.906	36x96	21.74
		36x120	27.19
!	!	48x96	28.99
!	!	48x120	36.24
24 ga.	1.156	36x96	27.74
		36x120	34.68
!	!	48x96	36.99
!	!	48x120	46.24
22 ga.	1.406	36x96	33.74
		36x120	42.19
!	!	48x96	44.99
!	!	48x120	56.24
20 ga.	1.656	36x96	39.74
		36x120	49.68
!	!	48x120	66.24
18 ga.	2.156	36x96	51.74
		48x96	68.99
!	!	48x120	86.24
16 ga.	2.656	36x96	63.74
		48x96	84.99
!	!	48x120	106.24
14 ga.	3.281	36x96	78.74
		48x96	104.99
!	!	48x120	131.24
!	!	48x144	157.49
12 ga.	4.531	48x96	144.99
		48x120	181.24
!	!	48x144	217.49
!	!	60x144	271.86
10 ga.	5.781	48x96	185.00
		48x120	231.24
!	!	48x144	277.49
!	!	60x144	346.86

“PAINTLOCK” / ELECTROLYTIC ZINC-COATED SHEETS
Gauge	Lbs./Sq. Ft.	Width & Length	Est. Lbs./Sheet
24 ga.	1.156	48x120	46.24
22 ga.	1.406	48x120	56.24
20 ga.	1.656	48x120	66.24
18 ga.	2.156	48x120	86.24
[TOP]